Filter By:
- Bar Ends (4)
- Bottom Brackets (25)
- Brakes/Levers/Pads (31)
- Cables (9)
- Cassettes/Freewheels (28)
- Chainrings (21)
- Chains (33)
- Cranksets (15)
- Show More Categories
- Derailleurs (22)
- Forks (1)
- Groups (4)
- Handlebar Grips/Tape (19)
- Handlebars (2)
- Headsets (6)
- Pedals (25)
- Saddles (13)
- Seatposts (4)
- Shift/Brake Combinations (4)
- Shifters (8)
- Stems (3)
- Other (69)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$149.99
Comfort without sacrificing power
Aeolus Elite brings comfort, power, and speed to road riders looking to dig deep and rotate further forward into a more aero road position. It's the go-to race saddle for both men and women who want to comfortably get the most out of their aero road bike. A shorter overall length with a wider nose and full cut-out ensure targeted support that eliminates soft-tissue pressure.
Product details
- inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort
- Designed to support riders in an Aero Road riding position
- Full saddle cut-out minimizes soft-tissue pressure allowing for a more powerful, rotated position
- Two sizes designed to align saddle with bone structure for both men and women and avoid soft-tissue compression
- Austenite rails are lighter and stronger than hollow Titanium
- Lightweight shell provides balance of weight, strength, and compliance
- Elite-level trim optimizes foam padding for added lightweight comfort
- Available Blendr accessory mounts to cleanly integrate rear light

$649.99
The day-in, day-out Eagle ecosystem hero is now available with AXS. The GX AXS upgrade kit is your entry point into wireless drivetrain simplicity. Compatible with any of our Eagle ecosystem cassettes and crank arms, the upgrade kit allows you to experience AXS without needing to buy an entire groupset—provided you already are using Eagle products. No matter if you are looking to upgrade your ride or looking for great value replacement parts, look no further than the GX AXS upgrade kit.
- Includes the SRAM GX Eagle AXS rear derailleur with battery, Eagle controller with clamp, charger with cord, and chain gap tool
- The GX Eagle AXS rear derailleur shifts on command, whether under climbing load or sprinting to the stage finish, and is smart enough to protect itself thanks to its incredibly resilient Overload Clutch
- Rear derailleur is compatible with 10-50t and 10-52t cassettes
- The GX Eagle AXS controller offers a unique wireless shifting experience with ergonomic touchpoints that are customizable to your preferences. You can choose what each button does through the AXS App

$33.99 - $44.99
When it's time to replace your 9-speed cassette, check out SRAM's PG-950 cassette. It delivers solid shifting and durability ride in and ride out for your 9-speed rig.

$69.99 - $74.99
SRAM's PG-1030 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette is available in four configurations perfect for riding off road, including one with a 36-tooth largest cog for super-easy climbing.

$29.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap

$51.99 - $59.99
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings.
- Spindle Interface type: Square Taper JIS

$149.99
A versatile trail saddle with a shorter profile that gives targeted comfort to riders of all genders and all disciplines.
Trail-ready comfort and performance
Verse Short Elite Trail Saddle takes comfort to the trail with a lightweight yet durable design that offers targeted support for all riders, all genders, and any off-road discipline. The short profile with a full cutout provides lasting comfort and Wing Flex allows the saddle’s edges to flex and adapt to riders’ inner leg movement and pelvic rotation.
Product details:
- Short profile provides targeted support for riders of any gender in a performance riding position
- Wing Flex allows the shell's edges to adapt to riders' inner leg movement and pelvic rotation
- Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance
- Featherweight shell with Austenite rails that are lighter and stronger than hollow titanium
- Rugged finishing materials combine with Elite-level foam for lightweight comfort and durability
- Multiple widths and extended rail clamping area give more fit options
- inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort
- Blendr accessory mounts offer clean integration of a Flare tail light
For men, for women, for mountain, for road.
Verse Short is designed to add comfort for all genders. It's your go-to performance posture saddle for both trail and road.
Features:
Short profile
The short profile provides targeted support and a performance riding position for all genders.
Wing flex
Wing flex allows the saddle shell's side edges to flex and adapt to a rider's inner leg movement and pelvic rotation.
Full-length cutout
A full saddle cutout minimizes soft tissue pressure for lasting comfort and performance.
Blendr integration
Easily mount Bontrager Flare rear lights with the Blendr accessory mount, available separately.
Crash resistant
Verse Short Trail Elite features an abrasion-resistant coating to protect your investment in case things get too rowdy on the trail.

$48.99
Shimano's 105 10-Speed Cassette delivers excellent shifting and durability. The cogs are made of long-lasing, smooth-running steel. They have Shimano's engineered tooth shapes for precision shifting. And for lightness, the cassette has an aluminum carrier for the top cogs and nylon spacers.

$32.99 - $35.99
The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain.
- Precision indexed shifting
- 8/7/6-speed compatible
- 3 crank length specification available
- Precise chain line control
- Light and reliable shifting
- Versatile performance
- Wide compatibility with multiple components
- Quick and precise assembly

$49.99
MTB flat pedals with a durable nylon design and replaceable pins for consistent grip.
Confident and durable
Most downhillers, dirt jumpers, and enduro riders prefer flat pedals, but any trail rider can appreciate the benefits of the Line Elite MTB pedal. It features a durable nylon body and solid platform with replaceable traction pins, so every time you place your foot your shoe stays put. It also has a durable axle and sealed cartridge bearings to ensure lasting performance.
- Durable nylon body with a proven shape for comfort and confidence
- Durable axle spins on sealed cartridge bearings
- Replaceable steel traction pins
- Install with either 6mm hex or standard 15mm pedal wrench
- Spindle diameter: 9/16-inch

$17.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt

$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs

$29.99
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

$89.99
- An aggressive posture 2 saddle that excels both on the road and mountain bike
- Contour Relief Zone Plus (CRZ+) full saddle cutaway enhances soft tissue protection
- Soft cushion padding provides ultra comfort
- Channel Flex on bottom of shell for added compliance
- Abrasion resistant polymer-edge adds durability without adding weight
- inForm BioDynamic products optimize your natural movement for sustained, higher performance

$59.99
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant.
- Rounded edges are UCI-compliant and allow for easier wheel installs
- Compatible with both road and mountain bike brakes
- Includes steel rotor bolts

$44.99 - $55.99
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant.
- Compatible with both road and mountain bike brakes
- Rounded edges are UCI-compliant and allow for easier wheel installs
- Hub interface: CenterLock
- Rotor Type: Centerline

$19.99
The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.

$29.99 - $39.99
When it's time to replace your old 8-speed cassette, check out SRAM's PG-850. Its steel construction and SRAM's PowerGlide technology combine to deliver miles of solid shifting and outstanding durability.

$26.99 - $29.99
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD).
- For use with Level Ultimate & Level TLM Brakes
- Pad Material: Organic
- Type: Road/CX
- Includes guide pin, clip, & pad spreader

$17.99
SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.

$69.99
A fitness saddle with a patented fluid technology that moves freely with you as you pedal for less pressure and more comfort.
Bontrager's Commuter Fluid Saddle moves with you to reduce pressure on fitness rides and commutes. The patented fluid technology performs better than standard gel—and it's paired with air foam and a full cutout for soft tissue protection and support. Plus, you can easily attach a Flare tail light to the rear-facing Blendr mount!
Product details
- Fluid adds comfort by moving with you as you pedal to alleviate pressure
- Fluid is better than gel at reducing pressures, showing an average reduction of over 20% in peak pressure compared to gel alone
- Full cutout provides targeted support and soft-tissue relief
- Dual-density shell and air foam construction is soft yet supportive
- Blendr attachment allows for integrated rear light mounting
- inForm saddles utilize the latest in biomechanical research to maximize performance and rider comfort
- The Unconditional Bontrager Guarantee offers 30 days to love it, or we'll take it back

$14.99 - $19.99
Key features:
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with Bontrager XXX Blendr stem
- Add any XXX accessory mount (sold seperately) for an elegant, integrated look

$44.99
A dual-density lock-on grip with an ergonomic design and IsoZone vibration damping for all-purpose comfort.
- Integrated clear gel adds comfort and shock absorption
- Dual-density compound design provides secure grip, control, and comfort
- Contoured design comfortably supports palm to decrease fatigue
- Lock-on clamp securely holds grip core to bar, eliminating slipping

$11.99
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars.
- Required for bar end use on Satellite Plus Isozone bars
- For use with clamp style bar ends
- Includes 2 adapters and 2 rubber handlebar inserts.
- Bar end sold separately

$49.99
With more disc brake platforms on the market than ever before, fitting hydraulic hoses can be complex and frustrating. That’s why we developed the Quick-Fit Hydraulic Hose adapter system, a foolproof approach utilizing proven caliper-adapter technology from the motorcycle world. Pro universal hoses makes it safe and easy to dial in a perfect fit.
Simply select a Pro hydraulic hose and match it with a compatible Mountain Pro Quick-Fit adapter kit. It’s that easy. Pro Hydraulic Hoses come in a wide array of colors. Pro Quick-Fit adapter kits are available separately in convenient packaging for the most popular brake manufacturers and models.
- A Kevlar weave surrounding the liner prevents bulges due to heat buildup and extreme pressure
- Each hose has 2 caliper-side universal couplers that connect to the Quick-Fit Adapters (sold separately)
- Mountain Pro hydraulic hose kits are available in 12 colors and finishes
- Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos

$119.99
The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Composite
- Spindle: Chromoly+
- Platform material: Stainless Steel
- Platform area: 500mm²
- Platform width: 50mm
- Q Factor: 53mm
- Stack height + cleats: 17.3mm (11 + 6.3mm)
- Weight (pedal): 130g
- Weight (pair + cleats): 328g

$15.99
BB-UN26 cartridge bottom bracket.
- Smooth rotation
- Square taper spindle
- Sealed cartridge bearing assembly

$20.99 - $24.99
Shimano BB-ES300 Octalink V2 Bottom Brackets
- Fits Shimano Octalink V2 Spline Cranksets
- Crankarm fixing bolts not included

$103.99 - $139.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
Page 1 of 12
Next page